Screws for Plastics

 

Product Overview

Plas-Tech® 30° Screws for Plastics

 

Plas-Tech® 30° Screws for Plastic feature a 30º thread angle and an 8º pitch angle to optimise performance in all types of thermoplastics.

The 30º thread profile minimises radial expansion and stress in the boss. It also increases load-carrying capabilities through increased thread engagement and can be used in repeat assembly operations.

 

The optimum thread pitch allows deeper thread engagement and increases pull-out values. The recessed thread root allows optimal material flow, minimises installation torque, improves clamp load and minimises the potential of the boss cracking. The round body of the screw evenly distributes the surface contact between the application and the screw, improving load ratio.

Plas-Fix® 45° Screws for Plastics

 

Plas-Fix® 45° Screws are a Metric 3-Lobe Bodied Screw that encompass a 45º thread profile which allows deep thread penetration into the plastic material. The 3-lobe body allows displaced material to cold flow back into relief areas which minimises radial stress and reduces the possibility of boss failure.  

Plas-Fix® 60° Screws for Plastics

 

Plas-Fix® 60° Screws are an Inch 3-Lobe Bodied Screw that feature a 60° thread profile which allows deep thread penetration into the plastic material. The 3-lobe body allows displaced material to cold flow back into relief areas which minimises radial stress and reduces the possibility of boss failure.  

Type BT (25) & Type Y Thread Cutting Screws

 

Thread Cutting Screws are designed to “cut” threads in thermoset plastics. Thread Cutting Screws minimise installation torque and maximise assembly performance. Each type has design features that allow the screw to form a thread with lower torque figures whilst accommodating the removal of the waste material.

High-Low Threads (30°High - 60°Low) Screws for Plastics

 

High-Low screws are twin threaded and have two widely spaced threads for use in thermo plastic material or chipboard. The high thread has a 30° included angle whilst the low thread has a 60°included angle. The twin thread profile allows increased thread engagement in softer thermoplastics increasing pull-out loads and improving thread stripping torque values.

ORBIT AROUND

 

Left Click + drag or one

finger drag (touch)

ZOOM

 

Double click on the model

or scroll anywhere or 

pinch (touch)

PAN

 

Right click + drag or two

fingers drag (touch)

View 3D Interactive Model - Plas-Tech® 30 Screw

BSI Logo.png

Registered trade marks include: T-Drive®, Plas-Tech®, Plas-Fix®, Tap-Fix®, K-Series® & CASTLE®

All images are copyright protected and the property of Lancaster Fastener Co Ltd

In accordance with the RoHS 2 directive, our stock is free from Hexavalant Chromium.  Learn more

Tel:  + 44 (0) 1524 389232
Fax:  +44 (0) 1524 66367

enquiries@lancasterfastener.co.uk